8
Disconnect the electric connector of the auto glove compartment, and remove the auto glove compartment. Once
you have removed it, you will have enough space to perform the connections between the multimedia interface, the
additional module and the vehicle’s screen and you will have too, space to place the multimedia interface.
Now we will proceed to place the touch screen. To do that, first we will have to disassemble the frame using a nylon
wedge and then we will unscrew the two rear Torx screws.
The screen will be removed and then it will be possible to disassemble the front metal frame of the screen. Using a
pair of pliers and a wedge we are going to remove the metal frame.
Now, remove the screen’s metal frame and clean the screen using a specific cleaning product and a microfiber cloth.
Then we will place the touch screen and the screen’s metal frame.
NOTE:
Don’t tighten too much the metal frame, it only has to be holded.
