26
4.
FAQ’S/Solving problems:
1.
¿Why do I can’t change the interface mode?
•
Check if the IR cable is connected or not.
•
Check if the interface
red
LED light
is shining or not. If it isn’t shining, check if the
“POWER”
connector is
right connected.
•
Check if
CAN
connections have been done correctly.
2.
¿Why does my screen show up all black?
•
Check if the interface
green LED light
is shining or not. If it isn’t shining, check the RGB connections of the
devices connected to the multimedia interface, and check that these devices are working properly.
•
Check that the GPS Box
RGB
cables are correctly connected.
3.
¿Why do I can’t see the rear’s camera image?
•
Check the position of the
DIP Switch 7,
check all the connections from the camera to the interface:
“REAR
C”, “R-‐CAM”, “CAM” y “REAR”
4.
¿Why do I have to pass through all the interface’s modes until I get the one I want?
•
Check that you have disabled the entries of the multimedia devices that you are not going to use, positioning
correctly the corresponding DIP PINS of the interface.
5.
¿Why do I can’t see my vehicle screen's original image?
•
Check if the cables of the original screen of the vehicle are correctly connected.
