VAF instruments T-SENSE, Техническое руководство

Страница: 11 / 28

11
6. IP settings of the PEM4 display
In order to have no malfunction of the system the IP settings of the PEM4 display have to be set up
correctly. The next steps will explain how to adjust the IP settings of the system.
Switch off the power supply of the PEM4 display. Wait for 1 minute and then repower the PEM4.
Enter password “5678” end press login. The screen below will appear.
Change the Address to http://168.0.0.120 (this is the default IP address of the stator control box)
and press “Save setting”. Then Press “Ethernet settings”. The screen below will appear.
Press “Ethernet settings”. The next screen will appear.