6
Dimensions
3
Operating Specifications
Operating Pressure:
Minimum operating pressure 3 bar
Maximum operating pressure 5 bar
Installation - shower (and optional spout)
Rubber
washer
Nut
Flexible pipe
Connecting
tube
Shower
hose
Base
shroud
Base
ring
Washer
Hand set
Position the spout in place , and from the
underside slide on the rubber washer,
and then the washer/nut. Tighten the
nut to clamp on the spout.
CAUTION:
Do not over tighten the nut.
Connect the spout to the diverter using
the large flexible pipe.
Rubber
washer
Washer
Nut
Remove the nut, washer and rubber
washer from the connecting tube. Push
the shower hose and connecting tube
down through the hole, make sure the
seal is in position in the bottom of the
base shroud. From the underside slide
on the rubber washer, metal washer and
then the nut. Tighten the nut to clamp on
the cover plate.
CAUTION:
Do not over tighten the nut.
Place a rubber washer into the nut end
of the shower hose and screw onto the
flexible pipe coming from the diverter.
Place the rubber washer into the cone
end of the hose and screw to the handset.
Flexible pipe
35mm
48mm
55mm
45mm
42mm
55mm
38mm
65mm
180mm
110mm
57mm
110mm
20mm
90mm
5mm
36mm
Spout
Shower
hose
