8
9
Handset
Place one of the rubber washers into the
cone end of the hose and screw to the
Showerhead.
Installation
Handset
Cone end
of hose
Washer
Handset holder
Warning! Please check for any hidden
pipes and cables before drilling holes in
the wall.
If you are fitting the unit to a partition wall
or a wall of particularly soft substrate you
will need specialist fixings.
Select the position for the shower holder
bracket and mark the 2 fixing positions
with a suitable pencil.
Remove the holder from the wall.
Suitably fix the holder to the wall using
appropriate fixings.
Holder
Pencil
Holder
Screws
Wall plugs
(if required)
Operation:
Pull the diverter handle and turn
clockwise to lock into position.
Turn clockwise again to release the
diverter and go back to the primary outlet.
Lifting the mixer lever upwards will
increase the flow of water.
Moving the mixer lever from right to left
will increase the water temperature.
Moving the mixer lever from left to right
will decrease the water temperature.
