6
7
3
Installation - Quick guide
Installation
Valve
Hot
Outlet
Outlet
Before installing your new mixer, flush through the pipework to ensure removal of
debris, turn off the water supply.
Warning!
Please check for any hidden cables and pipes before drilling holes in
the wall.
Use the plastic cover as a depth guide and also as protection for the chrome
surface during installation (see above).
The valve must be set into the wall by 50-70mm (see dimension page).
If you are fitting the valve to a partition wall or a wall of particularly soft substrate
you will need specialist fixings.
Select the position for the shower valve and offer the shower valve to the wall,
mark the 4 fixing points at the top and bottom with a suitable pencil. Remove the
shower valve from the wall and secure with suitable fixings.
Make all connections to the valve. Connect hot supply to left inlet of the valve and
cold supply to right inlet.
Connect the outlets to the desired channels e.g. top outlet to the showerhead and
bottom outlet to the bath.
Finish the wall, keep the final finished wall surface between the min and max
dimensions.
Plastic cover
Cold
6
2
1
4
3
5
