8
9
Handset holder
Warning! Please check for any hidden
pipes and cables before drilling holes in
the wall.
If you are fitting the unit to a partition wall
or a wall of particularly soft substrate you
will need specialist fixings.
Select the position for the shower holder
bracket and mark the 2 fixing positions
with a suitable pencil. Remove the bracket
from the wall, drill 6mm diameter holes
to a depth of 35mm, insert the wall plugs
and secure the bracket to the wall using
the screws provided.
Push the holder back onto the bracket.
Handset
Place one of the rubber washers into the
cone end of the hose and screw to the
Showerhead.
Installation
Bracket
Wall plugs
Handset
Cone end
of hose
Washer
Screws
Holder
Bracket
Operation
Cold
Hot
Diverter
Pull the shower control knob
up to turn on the shower,
turn to lock in position.
Turn clockwise again to
release the diverter and go
back to the primary outlet.
Hot tap
- Turning the handle
clockwise will increase the
water temperature.
Cold tap
- Turning the handle
anti-clockwise will decrease the
water temperature.
