8
9
Handset
Place one of the rubber washers into the
cone end of the hose and screw to the
Showerhead.
Installation
Handset
Cone end
of hose
Washer
Handset holder
Warning! Please check for any hidden
pipes and cables before drilling holes in
the wall.
If you are fitting the unit to a partition wall
or a wall of particularly soft substrate you
will need specialist fixings.
Select the position for the shower holder
bracket and mark the 2 fixing positions
with a suitable pencil.
Remove the holder from the wall.
Suitably fix the holder to the wall using
appropriate fixings.
Holder
Pencil
Holder
Screws
Wall plugs
(if required)
Operation
Cold
Hot
Hot tap
- moving the tap
lever to the left will increase
the flow of water.
Cold tap
- moving the tap
lever to the right will increase
the flow of water.
Diverter
Pull the shower control
knob up to turn on the
shower, turn clockwise to
lock in position.
Turn clockwise again to
release the diverter and go
back to the primary outlet.
