ZoomSHOT 20 for AV Bridge MATRIX PRO
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A
Page 7 of 18
Diagram: Basic Wiring Configuration with MATRIX PRO
ZoomSHOT 20 HD POV Camera with AV Bridge Matrix PRO showing basic connectivity with color coded RJ-45
jacks. Obviously, there’s a whole bunch more stuff going on here with the MATRIX PRO, that’s why we suggested
earlier that using the MATRIX PRO manual in conjunction with this brief manual for the ZoomSHOT 20 is probably
your best bet.
Z
OOM
SHOT
20
F
IRST
T
IME
S
ET
-
UP
:
The ZoomSHOT 20 was designed to be very easy to use and operate. There is documentation at the back of this
manual for pin-outs of the connectors on the camera.
Before Installing:
Choose camera mounting location, paying close attention to camera viewing angles, lighting conditions,
possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted.
Always pick a mounting location that will optimize the performance of the camera. Please locate the camera to
enable easy positioning of the camera body with the ability to point down and away from the ceiling and a pile
of fluorescent lighting cells.
Cameras generally don’t like to be swamped with fluorescent light and nobody sits
on the ceiling anyway
.
The Thin Profile Wall Mount for the ZoomSHOT 20 can be mounted directly to a 1-gang wall box or can be
mounted using only dry wall anchors.
For Power/Video and RS-232 signals, use standard Cat-5/5e/6 cable (568B termination and real RJ-45
connectors) from the EZ-POWER VIDEO and RS-232 ports on the back of the ZoomSHOT to the MATRIX
PRO. These jacks are
color coded
for ease of connection.
HDMI Out to Monitor
EZ-POWER VIDEO
Cat-5 (orange to orange)
HD Video to MATRIX PRO - Power to Camera
ZoomSHOT 20
Rear View
RS-232
Cat-5
(blue to blue)
Two Cat-5/5e/6 Cables
Up to 150’ (45.72m)
Simulated
Video Feed
AV Bridge MATRIX PRO
Rear Panel Connections
