ZoomSHOT 30 Fixed Camera with QUSB, QMini, QDVI System or for AV Bridge MATRIX PRO
Page 12 of 73
camera over Cat-
5 cable up to distance of 150’ (45.72m).
3) ZoomSHOT 30
DIP Switch Settings:
Settings for IR remote ID, IR receiver on/off, image flip, and digital zoom can be
configured on these switches.
Table: ZoomSHOT 30 DIP Switch Settings
DIP Switch
Function
1
Up = IR1, Down = IR2
2
Up = IR 1 or 2, Down = IR3
3
Up=IR ON, Down = IR OFF
4
Up = Normal Image, Down = Image Flip
5
Not Used
6
Update Position - Leave UP unless updating firmware
All Down
Reset to defaults
– with power cycle
4) HD Video Select:
A rotary switch allows the user to choose the HD output video resolution and format. After setting or
changing the resolution, reboot the camera to ensure proper operation. If an unassigned rotary selection position is chosen (9,
A, B, C or D), the camera will not output video. Simply set the rotary switch to an assigned position to output video. See rotary
switch settings below.
Table: ZoomSHOT 30 VIDEO Selections
For Quick-Connect USB Mini
2.0 streaming, use position “0” (720p/59.94) for best results.
Rotary
Resolutions
Rotary
Resolutions
0
720p/59.94 (USB)
8
1080p/50
1
1080i/59.94
9
--
2
1080p/59.94
A
--
3
720p/60
B
--
4
1080i/60
C
--
5
1080p/60
D
--
6
720p/50
E
1080p/30
7
1080i/50
F
1080p/25
6 - Position
DIP Switch
Point the notch in the switch stem to assign
the rotary position.
