VADDIO WIDESHOT WALLVIEW SR, Инструкция по установке и эксплуатации

Страница: 18 / 20

WideSHOT WallVIEW SR
WideSHOT WallVIEW SR System Document Number 342-0695 Rev A Page 18 of 20
WideSHOT Inquiry List
Inquiry Command Command Response Packet Comments
CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF
y0 50 03 FF
On
Off(Standby)
CAM_WBModeInq 81 09 04 35 FF y0 50 00 FF
y0 50 05 FF
Auto
Manual
CAM_AEModeInq 8x 09 04 39 FF y0 50 00 FF
y0 50 03 FF
Auto Exposure Mode
Manual Control Mode
CAM_IDInq 8x 09 04 22 FF y0 50 0p 0q 0r 0s FF pqrs:0x0000 – 0xFFFF
CAM_ApertureInq 8x 09 04 42 FF y0 50 00 0p 0q 0r FF pqr: Sharpness (0x00-0x010)
CAM_RGain 8x 09 04 43 FF y0 50 00 0p 0q 0r FF pqr: Red (0x00-0x010)
CAM_BGain 8x 09 04 44 FF y0 50 00 0p 0q 0r FF pqr: Blue (0x00-0x010)
CAM_Bright 8x 09 04 4D FF y0 50 00 0p 0q 0r FF pqr: Bright (0x00-0x010)
CAM_ShutterPosInq 8x 09 04 4A FF y0 50 00 00 00 0p FF p: Shutter Speed (0-8)
TallyInq 8x 09 7E 01 0A FF y0 50 02 FF
y0 50 03 FF
On
Off
BLK.Enhance 8x 09 7E 53 FF y0 50 00 0p 0q 0r FF pqr: Contrast (0x00-0x010)
CRM.Enhance 8x 09 7E 55 FF y0 50 00 0p 0q 0r FF pqr: Saturation (0x00-0x010)
DNR.Enhance 8x 09 7E 58 FF y0 50 00 0p 0q 0r FF pqr: Noise reduction (0x00- 0x010)
AGC.Enhance 8x 09 7E 59 FF y0 50 00 FF
y0 50 01 FF
y0 50 02 FF
Low
Auto
High
Shutter Speeds: 0:1/7680, 1:1/3840, 2:1/1920, 3:1/960, 4:1/480, 5:1/240, 6:1/120, 7:1/60, 8:Auto
Notes:
 The Camera module does not support an Auto White Balance option. The selection (Manual/Auto) resets the
Red and Blue Gain to defaults.

Auto White Balance inquiry will return “Auto” if Red and Blue are at default levels, manual if not.
 The Camera module does not support an Auto Exposure option. The Auto selection will reset Contrast,
Saturation, Brightness, and shutter speed to defaults.
 Auto Exposure inquiry will return Auto if Contrast, Saturation, Brightness, and shutter are at defaults. Manual
if not.