WallVIEW PRO Z700 Installation and User Guide 341-674 Rev. B
Page 6 of 12
GENERAL SPECIFICATIONS
WallVIEW PRO Z700 System
System Part Numbers
999-6805-000 NTSC
999-6805-001 PAL
Quick-Connect Interface
Connectors
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
IR: 2-Pin Phoenix type spring cage connector
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) or SD
Video RJ-45: Transports HD or SD video from camera depending on camera selection switch position
Camera Select Switch
8-Position DIP switch loads camera profiles and IR Forwarding for Polycom and TANDBERG Codecs
Video Adjustments
Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
Compatible Cameras
Sony BRC-H700, BRC-Z700, EVI-HD1, BRC-300, (EVI-D70, EVI-D100 also in SD Mode)
Polycom EagleEye
Max. Cat. 5 Cable
Distance
Up to 500’ (152.4m) for Video Power and Control
Power Supply
36 VDC, 2.78 Amp
Dimensions
1-RU Rack Mount (1.75” H x 19” W x 6” D)
EZCamera Interface Module
Connectors
Four (4) RJ-45 Connectors
One DB-25 for Power, Video, Control & IR
Cable Assemblies
For Sony HD Cameras: DB-25M to DB-15HD/8-Pin Mini Din x 2/EIAJ4 Power Connector
Power Regulator
Supplies 12VDC to Cameras
Dimensions
Approx. (3.035” H x 4.46” W x 1.242” D)
Sony BRC-Z700 Camera Basic Specifications
Camera Part Number
BRC-Z700
Image Sensor
1/4-type CMOS x 3
Effective Pixels
Approximately 1.07 Megapixels
Signal Systems
NTSC or PAL
Video Resolutions
HD 1080i
Lens
20x Optical, 4x Digital, 80x total
Horiz. Viewing Angle
1.8° tele to 55.2° wide (16:9)
Weight
Approx. 9 lbs 15 oz (4.5 kg)
Dimensions
Approx 10.25” W x 6” H x 6.75” D
(259mm x 150mm 169mm)
