WallVIEW HD-USB PRO Camera System
WallVIEW HD-USB PRO Camera System Document Number 342-0467 Rev. E
Page 7 of 40
C
ONNECTING THE
E
XTENSION
D
EVICES TO THE
C
AMERA
The following diagrams pertain to the connectivity of the WallVIEW HD-USB PRO Camera System with the Thin
Profile Wall Mount, Power Extension Module and Extreme USB 2.0 Extenders
Diagram: Basic Connectivity Example:
Dual CAT-5 Solution
Diagram: Basic Connectivity Example:
This example uses the HD-USB PTZ Camera, Extreme USB 2.0 Extenders with a power outlet located with the
camera. This single CAT-5 solution uses the Extreme USB 2.0 Extenders with local camera power, which allows
the distance of the CAT-5 cable to be up to 328.1’ (100m).
Note:
Please do not use USB 1.1 cables (USB 1.1 cables won’t work).
USB 2.0
Cable
WallVIEW HD-USB PRO
Host Tower PC with
UC Application
PC Video Monitor - HD Large
Flat Screen Format
Short USB
2.0 Cable
CAT-5 Cable - 24 VDC Power
(Pin 1: +, Pin 2: -)
To EZ POWER
VIDEO RJ-45 Port
24 VDC, 2.75A
Power Supply
Power Extension
Module
Host PC with Conferencing Application
Distance Limitation with the Power Extension Module is 150’ (45.7m)
Distance limitation with the Extreme USB 2.0 Extenders is 328.1’ (100m)
Using both the PEM and Extenders creates a limit of 150’ (45.7m) in this
example
1’ USB 2.0
Cable
IMPORTANT
Extreme USB
2.0 TX Unit
Extreme USB
2.0 RX Unit
CAT-5 Cable
Extreme USB
2.0 TX Unit
5 VDC from
Camera
WallVIEW HD-USB PRO
Extreme USB
2.0 RX Unit
1’ (305mm)
USB 2.0
Cable
CAT-5 Cable Distance can
be up to 328.1’ (100m)
12 VDC, 3.0 Amp
Power Supply
Local
Power
Single CAT-5
Solution
