VADDIO WallVIEW CCU HD-18 HD-SDI Скачать руководство пользователя страница 12

WallVIEW CCU HD-18

 

 

WallVIEW CCU HD-18 Manual 341-889 Rev. C 

 

               Page 12 of 18 

 
Compliance and CE Declaration of Conformity 

(Quick-Connect CCU and EZIM CCU)  

  

 

FCC Part 15 Compliance 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the user will be required to 
correct the interference at his/her own expense. 
 
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) 
This device must accept any interference including interference that may cause undesired operation of 
the device. 
 
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could 
void the user’s authority to operate this equipment. 
 
 
 

ICES-003 Compliance 

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus 
set out in the Radio Interference Regulations of the Canadian Department of Communications.   
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables 
aux appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique 
édicte par le ministère des Communications du Canada. 
 
 

 
European Compliance 

This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for 
Emissions and Immunity and meets the requirements for a Class A digital device.  In a domestic 
environment this product may cause radio interference in which case the user may be required to take 
adequate measures. 

 
Standard(s) To Which Conformity Is Declared: 
EMC Directive

 89/336/EEC 

 
EN 55022A

  

 

Conducted and Radiated Emissions 

EN 55024 

 

Electromagnetic Compatibility - Immunity

 

EN 61000-4-2

    

Electrostatic Discharge Requirements 

EN 61000-4-3

    

Radiated Electromagnetic Field Requirement 

EN 61000-4-4

    

Electrical Fast Transients / Burst Requirements 

EN 61000-4-5 

    

Surge Requirements 

EN 61000-4-6

   

Conducted Immunity Requirements 

EN 61000-4-8

   

Power Frequency Magnetic Field Requirements 

EN 61000-4-11

   

Voltage Dips, Interrupts and Fluctuations Requirements 

 
 

 
 
 
 

Содержание WallVIEW CCU HD-18 HD-SDI



















Отзывы: