When making cables for this product, use Cat-5e or better cable. We recommend using high-quality
connectors and a high-quality crimping tool.
We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or routed near
sources of electromagnetic interference such as power lines or fluorescent light fixtures.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in
equipment damage and will void the warranty.
Pro Tip
Label all cables at both ends.
Basic Connections – TableMIC
The TableMIC microphone connects to the EasyMic port on Vaddio conferencing products using a
standard Cat-5e (or better) cable up to 100 ft. (30 m).
Note
Cables with snag-free boots are not recommended, as they may not fit.
Complete Manual for TableMIC and EasyIP TableMIC D Conference Room Microphones
4
