Page 3 of 6
Firmware Update Instructions
– Quick-Connect USB Mini
Requirements
•
A computer connected to the Quick-Connect USB Mini via USB.
•
The
web interface’s admin password, if it has been changed from factory default.
•
The .p7m firmware file for the Quick-Connect USB Mini (found on the Quick-Connect USB Mini
’s product
page firmware tab), downloaded and saved to your local drive.
Step-By-Step Process
1.
To access the web interface of the Quick-Connect USB Mini the unit must be in Control Mode.
•
If the Quick-Connect USB Mini is showing up as a video device in the computer, it is in Video
Mode and needs to be moved to Control Mode.
•
To toggle between Video Mode and Control Mode, quickly press (do not hold) the white MODE
button and wait 45 seconds for the unit to finish changing modes.
•
Once in Control Mode Quick-Connect USB Mini will show up as a USB Ethernet/RNDIS Gadget.
2.
Enter the IP address (169.254.1.1) for the Quick-Connect USB Mini into the address bar of a web
browser.
3.
In the web interface, select Admin from the menu to open the Admin Login dialog box.
Do not press and hold the MODE button, that will initiate a Factory Reset of the device.
