PowerVIEW HD-22 and HD-30
PowerVIEW HD-22 and HD-30 HD PTZ Cameras Document Number 342-0626 Rev A
Page 6 of 16
Rear Panel Connections with Feature Call-outs
Image: PowerVIEW HD-22 or HD-30 HD PTZ Camera
5) RS-232 IN & IR Out:
The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by
the IR receivers, which can be transmitted to third party devices.
6) Dip Switch Settings:
Settings for IR remote, baud rate and image flip can be configured on these switches. See the Switch Settings
page for additional information.
7) HD Video Select:
A rotary switch allows the user to choose the component HD output video resolution and format. See the Switch
Settings page for additional information.
HD Resolution Note:
When changing the resolution of the camera, the camera should be power-
cycled after the change.
8) 12 VDC Input:
Power input for the standard, PowerVIEW HD-22 and HD-30 camera power supply.
9) HDMI Output:
The HDMI output feeds out HD digital video only (no copy protect or device communication is included). The
HDMI output is optimized for HD video signals (seems logical).
10) YPbPr Output:
Component HD video (YPbPr) is output through the DE-15 connector. YPbPr and HDMI signals are
simultaneous. Limited SD resolutions are supported.
11) EZ Power/Video Port:
This RJ-45 connector is only used with the Quick-Connect SR Interface, Quick-Connect DVI-D/HDMI SR
Interface and the Quick-Connect USB Interface to supply power and return HSDS (differential) video from the
camera.
12) Slot for Optional Cards:
Optional slot cards can be plugged into the PowerVIEW HD-22 HD camera (the HD-SDI and the EZIM CCU Slot
Cards are available).
⑥
⑤
⑧
⑦
⑩
⑨
⑫
⑪
