Connecting a Cisco Camera
999-9660-000/001/009
In these diagrams, the OneLINK Bridge extends power and control to a Cisco camera, and brings HDMI
video from the camera to a display. The OneLINK Bridge also provides audio connections, and can
originate a USB stream to bridge non-USB equipment into a USB-based conferencing application.
n
OneLINK BridgeAV interface and OneLINK EZIM
n
Camera-side fan-out cable (not included; used with Precision 40 and Precision HD 1080p2.5x)
n
Cisco camera (not included)
n
HDMI display and HDMI cable (not included)
n
Laptop with soft conferencing client (not included)
n
Cat-5e cables for OneLINK and network connections (not included)
Cisco Precision 40 or Precision HD Series Camera
Note
If connecting to a Cisco Precision 40 or Precision HD 1080p2.5x camera, you will need to provide a Cisco
split cable, Cisco part number CAB-PHD4XS2-SPLIT.
25
Installation Guide for the OneLINK Bridge AV Interface
