Web Interface
The camera provides a web interface to allow control via an Ethernet network connection, using a browser. In
addition to the user-level camera control that the IR remote offers, the web interface provides up to 16 zoom
presets.
You will need to know the camera's IP address to use the web interface.
To display the camera's IP address:
Point the remote at the camera and press the OSD button. The camera overlays its IP address and MAC address
on the video output. Press the button again to dismiss the information display.
To access the web interface:
Enter the IP address or hostname in your browser's address bar. If you use the hostname, you may need to
enter
http://
as a prefix to keep the browser from treating it as a search query.
User Access
By default, the web interface opens to the Controls page, but the camera can be configured to require a user
login. The default user password is
password
, but this can be changed. Check with the system administrator if
the camera's web interface requires you to log in.
Only the operator's page is available with user-level access
Your camera's Controls page may look somewhat different.
3
