Basic Connections – EasyIP TableMIC D
This is a simple installation for a medium to large conference room, using the EasyIP TableMIC D with an
EasyIP system. In this installation, the microphones pair to an EasyIP Mixer over the network. The
EasyIP Mixer also manages speakers and video, and originates a USB 3 stream, making audio and
video available to soft conferencing applications.
EasyIP microphones can also be used with other devices that support Dante connectivity.
Note
Because EasyIP microphones are not directly connected to the device that manages them (an EasyIP
Mixer in the diagram above), they must be paired to the device in order to operate.
To work with the EasyIP TableMIC D and other Dante devices, you will need to download and install the
free Dante Controller application from Audinate Pty. Ltd.:
www.audinate.com/products/software/dante-
Things to know about Dante Controller:
n
Dante Controller does not work over Wi-Fi or across subnets. Your computer must be on the same
subnet as the Dante devices you need to work with.
n
Device names and IP addresses shown in Dante Controller do not match the corresponding
information shown in devices' web interfaces.
Audinate provides information, training, and documentation for Dante technology on their website.
Complete Manual for TableMIC and EasyIP TableMIC D Conference Room Microphones
5