ControlVIEW
™
Xtreme
Pan/Tilt/Zoom Camera Control Systems
The Vaddio ControlVIEW Xtreme Camera
Control System begins a new generation
in camera control systems. The system
is designed to control up to four PTZ
cameras and assign up to 72 total system
camera preset positions to any or all cameras. The ControlVIEW Xtreme works with any
VISCA controllable PTZ camera and has four video inputs for cameras one through four. The
internal four port video switcher automatically switches the video to that of the triggered camera.
Vaddio has a complete line of camera control triggering devices including the AutoVIEW
™
IR,
StepVIEW
™
, TouchVIEW
™
and MicVIEW
™
that can automate your camera control projects.
Presets can also be controlled by any number of different types of devices such as microphone
mixers, control systems, and contact closure devices.
Included Accessories
• 12 VDC power supply
• IR remote control
• Rack ears
• Terminal connectors
• Owners manual
Technical Features
72 Camera Presets
The ControlVIEW Xtreme can store up to 72
camera presets in the main control system.
This allows you to have as many presets as you
want and not be limited by the internal preset
limitations of the camera. Any combination of
presets can be assigned as needed between
the four cameras.
Four Port Video Switcher
A four port S-Video switcher is built into the
ControlVIEW Xtreme. The switcher can be auto-
matically switched by preset activation, manually
switched on the front panel or be switched by
using the IR remote control. The system pro-
gramming allows for setting up a default camera
video selection or a camera preset default.
VISCA Camera Compatibility
The ControlVIEW Xtreme can support any PTZ
camera that has a complete VISCA camera
control command set (such as the Sony
®
EVI
Series Cameras). Up to four PTZ cameras can
be controlled by the ControlVIEW Xtreme.
Universal Microphone Mixer Camera
Control Interface
Provides an integrator with an easy solution to
provide PTZ camera control with a new or
existing microphone mixer that has outputs for
gate status (also called logic outputs). Logic
outputs normally refer to a software/hardware
mixer that has variable gate status control
outputs that tell a external control device what
microphone is being switched on and off. The
ControlVIEW Xtreme takes that signal and
switches to the appropriate camera and preset
assigned to that microphone. Signal switching
on most mixers can be done by voice activation
or by push-to-talk microphones. The ControlVIEW
Xtreme can then be programmed to assign that
microphone to any one of four cameras and
then give it one of the 72 system camera pre-
sets. ControlVIEW Xtreme only requires that
the mixers logic/gate status output must provide
an ‘active high’ (up to 5 V) or ‘active low’ (0 V)
signaling.
Automatic Camera Detection
ControlVIEW Xtreme automatically detects the
number and type of camera on the system and
assigns them accordingly. Camera assignment
is based on their location on the daisy-chain
control string.
IR Remote Control
An IR remote control is included with the
ControlVIEW Xtreme. The remote provides the
ability to control camera selection, PTZ functions
and all camera preset programming.
