camera ccu set
Sets the specified CCU (lighting) information.
Synopsis
camera ccu set [param] [value]
Options
auto_white_balance
{on
| off}
Sets the current state of the auto white balance
setting (on or off). Auto white balance overrides red
gain and blue gain manual settings.
red_gain
[0 - 255]
Sets the red gain value as an integer (0 to 255). Can
only be used when auto white balance is off.
blue_gain
[0 - 255]
Sets the blue gain value as an integer (0 to 255). Can
only be used when auto white balance is off.
backlight_
compensation
{on | off}
Sets the current state of the backlight compensation
setting (on or off). Can only be used when wide
dynamic range mode is off.
iris
[0 - 11]
Sets the iris value as an integer (0 to11). Can only be
used when auto-iris is off.
auto_iris
{on | off}
Sets the auto-iris state (on or off). Auto-iris disables
manual iris and gain when it is on.
gain
[0 - 11]
Sets gain value as an integer (0 to 11). Can only be
used when auto-iris is off.
detail
[0 - 15]
Sets the detail value as an integer (0 to 15).
chroma
[0 - 14]
Sets the chroma value as an integer (0 to 14).
wide_dynamic_range
{on
| off}
Sets Wide Dynamic Range mode on or off. Can only
be used when backlight compensation is off.
Examples
>
camera ccu set auto_iris off
OK
>
Turns off auto-iris mode, returning the camera to manual iris control.
>
camera ccu set red_gain 10
OK
>
Sets the red gain value to 10.
camera recalibrate
Recalibrates the pan and tilt motors. This is typically done in response to a motor fault indication or error
message.
Synopsis
camera recalibrate
Example
>
camera recalibrate
OK
>
49
Integrator's Complete Guide to the ConferenceSHOT AV Enterprise-Class Conferencing System
