CCU Image Controller for the Canon XU-80/81 & XU-80W/81W
Vaddio CCU Image Controller - Document Number 342-0509 Rev B Page 7 of 12
Image: Rear Panel Controls and I/O
(from left to right)
Power Supply Input:
12 VDC 1.0 Amp Power Supply Input on a 5.5mm OD x 2.5mm ID connector.
RS-232 IN on RJ-45:
RS-232 Input from ProductionVIEW or PTZ controller. Daisy Chain control is not
supported.
RS-232 OUT on RJ-45:
RS-232 on RJ-45 provides for bi-directional control to the camera.
Tally on 2-pin Phoenix-type connector:
Contact closure illuminates the LED on front panel allowing
indication of which CCU/camera combination is the live Program in a multi-camera/CCU installation.
Camera Settings Dip Switch:
The CCU Controller has an 8-position dip switch on the rear panel to allow for
different modes of functionality and future functionality.
For the Canon XU Series cameras, Dip Switch #3
should be in the UP position and all other switches should be in the down position.
Basic XU-81 System Connectivity Examples
Image: XU-81 with Quick-Connect CCU Controller and ProductionVIEW HD-SDI Console
Image: XU-81W with CCU Image Controller and ProductionVIEW Precision Camera Controller
RS-232
RS-232
RS-232
RS-232
HD-SDI
Canon
XU-81
Canon XU-81W
with Wiper
HD-SDI
To Hot Shot Master
Studio HD-SDI Switcher
Control
Adapter
CCU Image Controller
CCU Image Controller
ProductionVIEW HD-SDI
ProductionVIEW Precision Camera Controller
Control
Adapter
NOTE:
The BLC button triggers the motorized Wiper
on the Canon XU-81W once each time it is pushed.
NOTE:
The BLC button triggers the motorized Wiper
on the Canon XU-81W once each time it is pushed.
