trigger
Turn an existing trigger on or off. This command has no effect if the specified trigger has not been defined.
Note
If the web interface's macro/trigger test mode is in use, this command is disabled.
Synopsis
trigger <1..10> {off | on | block <seconds> }
Required
<1..10>
The trigger index (identifier) – triggers 1 through 10
are available.
{
off
|
on
}
Set the state of the trigger.
Optional
block
Block execution of subsequent command to allow
macros to finish executing (similar to
sleep
). The
default time to block is 60 seconds.
<seconds>
Number of seconds to block.
Example
trigger 3 on
Turns trigger 3 on.
trigger 1 off block 10
Turns off trigger 1, and blocks for up to 10 seconds while any macros in progress
finish.
61
Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher
