EasyIP 10 Camera
The EasyIP 10 camera delivers great video with simple installation and minimal set-up. Use it with an
EasyIP Decoder or EasyIP Mixer.
Front View
Camera and zoom lens
– 10X zoom lens.
IR sensor
– Receives signals from the IR remote.
Status light
– Multi-colored LED that indicates the camera's current state.
n
Blue – Camera is active
n
Purple – Standby mode or booting
n
Yellow – Firmware update is in progress
n
Blinking red – Video mute is on (UC color scheme)
n
Blinking yellow – Motor out of calibration
Back View
Network/PoE+
– RJ-45 connector. Connect to a powered port on the PoE+ switch.
It doesn't get much easier than that, does it?
10
Installation Guide for EasyIP Systems
