Routing Audio – EasyIP Mixer
A
UDIO PAGE
, M
ATRIX TAB
The audio matrix defines where each audio output originates. Each column of the matrix shows one audio
output, and each row shows one audio input. Table cells highlighted in blue mean that the input represented
in that row is routed to the output represented in that column.
To specify how the EasyIP Mixer uses a given audio input:
Locate the row representing the audio input, and the column representing the desired output. Select the
table cell where the desired row and column intersect.
Example: In the screen shot below,
n
The auto mic mixer feeds near-end audio into the USB stream.
n
All available audio inputs go to the auto mic mixer.
n
The left and right USB playback channels (far-end audio) feed into Output 1 (a speaker) and all the
available Dante speakers. Left and right channels are separate for the HDMI output, so the HDMI audio
is in stereo. Output 2 is not used.
62
Complete Manual for EasyIP Systems
