Offset Drop Down Mount
Document Number 341-710 Rev. B
Page 4 of 4
9433 Science Center Drive
▪
New Hope, MN
55428
Toll Free: 800-572-2011
Phone: 763-971-4400
FAX: 763-971-4464
www.vaddio.com
Страница 1: ...d to connect to the Vaddio Offset Camera Mount Step 1 After installing the third party mounting hardware that the Offset Pipe Mount is to be connected to installation of the Vaddio Offset Drop Down mount may proceed Step 2 Tighten the offset pipe onto the third party pipe mount hardware using a strap wrench to prevent damaging paint on the offset pipe Step 3 For Vaddio WallVIEW PRO and CCU Install...
Страница 2: ... see Figure 3 Step 7 For Vaddio WallVIEW PRO and CCU Installations Connect the EZIM Break out cable to the EZIM Step 8 Place the camera onto the camera platform and connect all necessary cabling to the back of the camera Step 9 Use the supplied 20 screws feed the screws through the slot on the bottom of the camera platform and tighten them to the 20 threaded holes on the bottom of the camera Step ...
Страница 3: ...suitability of the building structure to carry the load of the camera and mount as well as to make sure that the camera is secured to the camera platform INTENDED USE These products were designed built and tested for use indoors and to support the weight size and shape of the prescribed products only Using these mounts for any other devices could damage that device and or create potentially unsafe...
Страница 4: ...Offset Drop Down Mount Document Number 341 710 Rev B Page 4 of 4 9433 Science Center Drive New Hope MN 55428 Toll Free 800 572 2011 Phone 763 971 4400 FAX 763 971 4464 www vaddio com ...
