background image

•  Built to handle clean and greywater with soft solids up to 15mm (no suspended solids like stones, 

pebbles, mulch or abrasive material such as sand, cement, dust or harsh detergents)

•  Optimum operating range: 4.3–3.2 metres head, 64–96 litres per minute

•  Max water temperature: 40°C

•  Max submersion depth: 6m

•  IP Rating: IP68

•  1PH, 230VAC ±10%, 50 Hz, (P1) 350W, (P2) 180W, Run current 1.75 A

PIT SIZE

The Vada V150 requires a minimum pit size of 450mm (L) x 450mm (W) x 510mm (H) to ensure the 
float can rise.

If your pit is tapered, ensure the float can be fully engaged without getting caught on the pit wall.

HELPFUL HINT

5

4

VADA 

SUMP PUMP

 

V150 

INSTALLATION MANUAL

KNOW YOUR PRODUCT

SPECIFICATIONS

Constructed from cast iron for durability and designed with a vortex impeller for improved water flow 
and reduced clogging. This pump is built to handle clean and greywater and soft solids up to 15mm 
O.D. at a 10% content or fine solids at 1% concentration. The sump pump is supplied as standard 
with a 10m power cable length and connections to suit 32mm, 25mm and 20mm hose. 

Note: 

A larger diameter hose or pipe will offer less resistance to flow and will give better performance.

Discharge outlet  
connection 32mm BSP FI

Suction inlet

10m Power cable

Standard float with automatic 
switch operation

Cast iron pump housing

Internal vortex impeller

510mm H

450mm L

450mm W

300mm

290mm

Содержание SUMP PUMP V150












Отзывы: