www.vacuvita.com
Vacuvita manual
21
Using the Vacuvita Home Base
with vacuum containers
- Carefully follow the instructions on page 15 ‘Using your Vacuvita
Home Base’ to ensure safe use of the device.
- Place your food inside the container.
Always allow food to cool to room temperature
before applying the vacuum.
- Do not fill the container beyond the max fill line, as food or liquids
may be pulled into the vacuum adapter.
- Ensure that the seal in the lid and the rim of the container are clean
and dry. Liquids and little pieces of food on the seal or the rim may
prevent the container from reaching the appropriate vacuum level or
cause leakage.
- Put the lid on the container and press firmly to close.
- Remove the cap from the adapter socket
behind the Home Base lid. Insert the free
side of the adapter hose into the vacuum
socket.
- The LED light rings will switch on below the
Home Base lid.
- Place the vacuum adapter on the valve and
gently press it down.
-
Press the capacitive touch control (the
middle of the area lit up by the circular
indicator light) to activate the vacuum
process.
- Hold down the adaptor on the valve of the
container. The system will automatically
switch off when it reaches the right vacuum
level.
- To open the container, release the vacuum
by gently pulling up one of the flaps of
the valve. You will hear a hissing noise that
indicates that the air is now entering the
container. When the hissing noise stops,
open the lid as usual.
ssss
