The surface of the wall has to be smooth, dry
and free of grease.
Remove the protective foil from the adhesive
tape at the wall holder part 1. Align part 1 with
cover directed downward and press firmly on
the wall for 1 minute.
The full load is achieved after 72 h at 20°C.
Alternativly screw part 1 of the wall holder to
the wall using the two screws enclosed in the
delivery.
Assemble part 2 of the wall holder to part 1 and
click into place.
Disassembling
Push both wings of the wall holder part 2 apart
and silde the part upwards.
1
2
When replacing the adhesive tape to fix the wall holder
we recommend to use the 3M™ VHB™ high performance
connection system 4932P.
3M
TM
and VHB
TM
are trade marks or registered trade marks
of 3M.
NOTICE
Assembling the wall holder
