vacuubrand MV 10 VARIO select, Инструкция по эксплуатации

Страница: 19 / 84

19 20901121_12+16_VARIO_Vsel_V1.0_020818
Risk of burns due to hot surfaces or overheating
The surface of the vacuum pump can reach operating tempera
tures >
70 °C , in particular when pumping heated media. The sur
face temperature of the silencer in particular might be elevated in
Avoid direct contact with the surface.
Use protection against accidental contact if the surface tem
perature is regularly elevated.
Allow the vacuum pump to cool down before performing main
The vacuum pump can be damaged due to overheating. Possi
maintain minimum distances.
When installing the device, ensure that there is a minimum
external forced ventilation.
Place the device on a stable surface; a soft surface such as
supply.
Remove covers from the device before operating it.
Avoid excessive heat input due to hot process gases.
Observe the maximum admissible media temperature
see chapter: 8.1.1 Technical data on page 70 .
Surface tempera
tures
Overheating