2 Channels Mobile DVR for Motorcycle
Operation Manual
13
connection due to shock and vibration.
(e)
Before inserting wires through holes, temporarily wrap the terminal
with tape to prevent bad connection from accumulated dirt or debris.
(f)
Tightly seal all electrical connection with tape to prevent loose
connection or leak leaking to the connection.
(g)
Connect the power behind the key ignition and fuse (not directly to
the vehicle battery) to avoid depleting the battery.
(h)
Suggest installing it in car storage trunk or unexposed areas to reduce
impact by forces, which may cause damages to the device and image
losses.
