![background image](http://html1.mh-extra.com/html/vacron/vit-6-series/vit-6-series_user-manual_3124588014.webp)
10
Camera setting page adjust optic and lighting elements, it is divided into two parts as above
picture. Each option is explained as below
1.
Light sensitivity
: Brightness, contrast, saturation and sharpness ranging from 0 to 255, the
default setting is 128. You can adjust the color on screen in this field.
2.
Back Light Compensation
: Back light compensate adjust for automatic compensation of
captured object under back lited environment, this will clarify the dark areas overshadowed
by light. Max, midium and min optnions available.
3.
WDR
: Wide Dynamic Range compensate and negate the overshadowy effect, this setting
will make thelightness and color in the whole frame more balanced and even.
4.
Flicker Control
: This setting balane out the flicker caused by light bulb and fluorencent light
of different frequncy (50Hz and 60Hz), so the viewing device does not apear light bar or wave
on screen.
5.
White Balance
: This function is enabled by default, it can change environmental light
source to a more balance white color, the image quality at dusk will appear natural.
6.
Color Mode
: Set to auto by default to automatically control IR CUT for transition between
day and night time. During day time IR CUT is set to blue glass to filter IR light and will turn off
IR LED automatically. The IR CUT is set to IR light and turn IR LED lighting.
7.
Video Stabilization
: This option is similar to anti shake in handheld camera, suitable for
environment with strong winds (limited to models of 720P and below resolution).
8.
Lens Distortion Correction
: Wide angle lens may distort the image, so called “fisheye
effect”, this function will lessen the effect to make the image flat.
9.
Image Sensor Mode
:
Binning
: Combine 4 pixels into 1 dpi to increase focal area and lightness, but this may lose
image sharpness (default setting).
Skipping
: Combine 4 pixels into 1 dpi, and skip adjacent 2 pixels of repeated color, this will
increase lightness and further increase focal area, but may lose image sharpness.
Window
:
A pixel is a dot on the sensor, without any process. This will produce the least focal
area of the three, but at the best image sharpness.
(the above setting is only applicable in D1, 720P, SXGA resolution, the rest is automatically in
window mode)