13
(4)
Image adjust
1. Day & Night
Mode:
Auto-General
When the condition light value matches the setting value, it will switch
to mode BLACK and WHITE automatically.
(1) Color
Burst
ON/OFF only be activated under mode BW and mode
Auto-General.
(2) Delay
Control
(0~255)
Day and Night switch timer set up. Only be activated under
mode Auto-General.
(3) Day to Night: (Value: 0-255). “Only” be activated under mode
Auto-General.
The value of Day to Night switches point setting (Color to BW
switch). The Day to Night switch point “MUST” be latter than
Night to Day recovery point.
(4) Night to Day: (Value: 0-255). “Only” be activated under mode
Auto-General.
The value of Night to Day switch point set up (BW to Color). The
Night to Day recovery point “MUST” be latter than the Day to
Night switch point.
(5) IR CUT output
LEVEL: (High/Low/Off) only be activated under mode
Auto-General. A high/low signal generated by GPIO3 in order
to provide a standard point for IR-CUT switching.
Press
to into OSD.
Press
to into sub-menu.
Press /
：
Selection.
Press
：
Return.
