Vacon NXL, Инструкция по монтажу

Страница: 3 / 6

vacon
•
3
Mounting procedure:
1.
Make an opening in the cabinet door for the control keypad using the keypad dimensions (real
scale) in Appendix 1. The dimensions of the opening are 55 (tole2 and-1) mm x 37
(tole2 and -1 ) mm.
2. Make also holes for the screws
[
M4x12
]
using the real scale dimensions of Appendix 1.
3. Place the door keypad frame (1) in the opening so that the screw holes you made in the
cabinet door meet the bushings on the backside of the control keypad.
4. Fix the control keypad on the cabinet door by tightening the screws (2). Don’t forget to place
the washers (2) between the door and the screws. Use tightening torque of 1.5 Nm.
5. Connect the RS 232 cable (3) to the terminal of the control keypad.
6. Attach the RS 232 adapter (4) to the frequency converter and connect the cable to the adapter.
7.
Vacon NXL Door Keypad is now ready for use.