Vacon CX Series, Руководство пользователя

Страница: 13 / 23

VACON CX Modbus user’s manual Page 13
________________________________________________________________________________________
________________________________________________________________________________________
Vacon Oy
Phone +358-201-2121 Fax: +358-201-212 205
7. MODBUS-VACON CX INTERFACE
Features of Modbus-Vacon CX interface:
•
Direct control of Vacon CX ( e.g. Run, Stop, Direction, Speed reference, Fault reset)
•
Full access to all Vacon CX parameters
•
Monitor Vacon CX status (e.g. Output frequency, Output current, Fault code ..)
•
Diagnostic of modbus communications
7.1
Modbus function codes
7.1.1 Function code 1, Read Control Bits
This function is used to read control bits.
The transaction frames:
Query:
Slave
address Function
code Starting
Address HI Starting
Address LO Number of
points HI Number of
points LO CRC16
1 byte 1 byte 1 byte 1 byte 1 byte 1 byte 2 bytes
Response:
Slave
address Function
code Byte count Data bits CRC16
1 byte 1 byte 1 byte 1 byte 2 bytes
7.1.2 Function code 2, Read Status Bits
This function is used to read status bits.
The transaction frames:
Query:
Slave
address Function
code Starting
Address HI Starting
Address LO Number of
points HI Number of
points LO CRC16
1 byte 1 byte 1 byte 1 byte 1 byte 1 byte 2 bytes
Response:
Slave
address Function
code Byte count Data bits CRC16
1 byte 1 byte 1 byte 1 byte 2 bytes
7.1.3 Function code 3, Read Parameters
This function is used to read VACON CX parameters.
The transaction frames:
Query:
Slave
address Function
code Starting
Address HI Starting
Address LO Number of
points HI Number of
points LO CRC16
1 byte 1 byte 1 byte 1 byte 1 byte 1 byte 2 bytes
Response:
Slave
address Function
code Byte count Data HI Data LO CRC16
1 byte 1 byte 1 byte 1 byte 1 byte 2 bytes