vacon • 82
Monitoring menu
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
6.1.3
Basic
See Table 48 in which the basic monitoring values are presented.
NOTE!
Only standard I/O board statuses are available in the Monitor menu. Statuses for all I/O board sig-
nals can be found as raw data in the I/O and Hardware system menu.
Check expander I/O board statuses when required in the I/O and Hardware system menu.
Table 48. Basic monitoring menu items
Code
Monitoring value
Unit
Scale
ID
Description
V2.3.1
Output frequency
Hz
0.01
1
Output frequency to motor
V2.3.2
FreqReference
Hz
0.01
25
Frequency reference to motor control
V2.3.3
Motor speed
rpm
1
2
Motor actual speed in rpm
V2.3.4
Motor current
A
Varies
3
V2.3.5
Motor torque
%
0.1
4
Calculated shaft torque
V2.3.7
Motor shaft power
%
0.1
5
Calculated motor shaft power in %
V2.3.8
Motor shaft power
kW/hp
Varies
73
Calculated motor shaft power in kW or hp.
Units depends on the unit selection parameter.
V2.3.9
Motor voltage
V
0.1
6
Output voltage to motor
V2.3.10
DC link voltage
V
1
7
Measured voltage in the drive’s DC-link
V2.3.11
Unit temperature
°C
0.1
8
Heat sink temperature in °C or °F
V2.3.12
Motor temperature
%
0.1
9
Calculated motor temperature in percent of
nominal working temperature.
V2.3.13
Motor Preheat
1
1228
Status of Motor preheat function.
0 = OFF
1 = Heating (feeding DC-current)
