User interfaces
vacon • 77
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5.3.7
Favorites
NOTE:
This menu is not available in text keypad.
Favorites are typically used to collect a set of parameters or monitoring signals from any of the key-
pad menus. You can add items or parameters to the Favorites folder, see chapter .
To remove an item or a parameter from the Favorites folder, do the following:
5.3.8
User levels
User level parameters are intended to restrict the visibility of parameters and to prevent unautho-
rized and inadvertent parameterization on the keypad.
Table 43. User level parameters
Code
Parameter
Min
Max
Unit
Default
ID
Description
P8.1
User level
1
3
1
1194
1 = Normal; All menus visible in
the Main menu
2 = Monitoring; Only Monitor,
Favorites and User Levels menus
are visible in the main menu
3 = Favorites; Only Favorites and
User Levels menus are visible in
the Main menu
P8.2
Access code
0
99999
0
2362
If set to other value than 0 before
switching to monitoring when e.g.
user level
Normal
is active, the
access code will be asked when
trying to switch back to
Normal
.
Can therefore be used to prevent
unauthorized
parameterization on the keypad.
Motor Nom Freq
50.00 Hz
Favorites
STOP
READY
I/O
Help
Motor Nom Freq
STOP
READY
I/O
Monitor
Rem from favorites
OK
OK
9172
.e
m
f
STOP
READY
Keypad
ALARM
ID:2362
P8.2
User levels
User level
Normal
Access code
00000
STOP
READY
I/O
ALARM
00000
Min:0
Max:9
ID:2362
P8.2
Access code
OK
9173.emf
