24
- Caller Identified Ring: If you are receiving Caller ID service and would like to set a
distinctive ring for a recognized phone number, press “NEXT (
…
)” and choose a
desired incoming bell type.
- Once finished registering all information for the entry, press “OK (
‥
)” to store.
- Then you can see a message that the number you wanted to store was stored
successfully. And it goes to stand-by mode.
b. Phonebook
Search
i) Search by Name
Search numbers stored in the Phonebook by entering a name.
- Press selecting “MENU (
‥
)”, “6. Utility”, “1. Phone Book ” and “2. PB Search”
and “1. Name”.
- Enter the name to search for.
- If you don’t remember the full name, just enter the first letter. Your phone will
display a list of all similar names.
- Press SEND to dial.
- Or press “VIEW (
‥
)” to edit or “DEL(
…
)” to delete
ii) Search by Number
Search numbers stored in the Phonebook by entering a phone number.
- Press selecting “MENU (
‥
)”, “6. Utility”, “1. Phone Book ” and “2. PB Search”
and “1. Number”.
- Enter the number to search for and press “OK (
‥
)”. Then, the name and location
assigned to that number will be displayed.
- Press SEND to dial.
- Or press “VIEW (
‥
)” to edit or “DEL(
…
)” to delete.
- If the entered number is not stored in the Phonebook, a warning tone will sound and
“No Number Match” will appear on the display.
iii) Search by Location
Search numbers stored in the Phonebook by entering a location number.
- Press selecting “MENU (
‥
)”, “6. Utility”, “1. Phone Book ” and “2. PB Search”
and “3. Speed Key”.
- Enter the location number and press “OK (
‥
)”.
- Press “SEND” to dial. “VIEW(
‥
)” to edit or “DEL(
…
)” to delete.
- If a number is not stored in the location, “Empty Location” will appear on the
display.