Vacmaster VWM510, Руководство оператора

Страница: 9 / 17

9
DRY VACUUM OPERATION
WARNING:
BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION
ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH
FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE
GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT
TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS.
EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN,
OR GUN POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR
DUST, DO NOT VACUUM TOXIC MATERIALS.
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. In order to prepare your vacuum for dry vacuuming, verify that the cartridge filter is securely
mounted. Make sure the filter is pushed in until it stops against the power head. (fig. 2) Your
Wet/Dry Vac comes with the cartridge filter pre-installed. For installation instructions, see page
13.
3. Optional: For improved dust filtering, fit collection bag flange onto the inlet port, taking care not
to damage the bag. Dust bag sold separately.
4. Place filter retainer on top of cartridge filter and tighten down by turning the retainer handle
clockwise. (fig. 3)
5. Place the power head back on the collection tank, aligning the top section with the latches, and
snap into place. (fig. 4)
OPERATING INSTRUCTIONS: DRY VACUUMING
6. Insert the locking end of the hose into the vacuum port on the power head and lock into place.
Push the required attachment onto the free end of the hose or extension. (fig. 5)
7. Plug the power cord into the outlet and hang the vacuum onto the rack or use off the rack . (fig. 6)
8. Turn the motor on by flipping the switch to the ‘I’ ON position. (fig. 7) For remote control use,
set the power switch to remote control position “ ” and turn the vacuum on by pressing the ‘I’
ON button on the remote control handle for at least one second. (fig. 8 & 9)
9. Once you have completed vacuuming, flip the switch to the ‘O’ OFF position or press the ‘O’
OFF button on the remote control for at least one second.
O = OFF I = ON = Remote Control
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.