background image

-12-

2. To switch the speed to LOW, press the on/off button again. 
    The LED indicators will indicate the LOW speed with one LED illuminated.

Note:

 

•    You will know the battery needs charging once the LED indicators change 

from blue to red.

•  For best performance, empty the dust container once dust reaches the "MAX" 

level marked on the dust cup while vacuuming. Follow instructions on page 
13.

3. To stop the vacuum, press and hold the on/off button for 1 second for a third 

time.

         

Caution

: The suction nozzle must be free of any obstructions at all times. 

Otherwise, the motor will over heat and could become damaged.

         

Caution

: Moving parts! To reduce the risk of personal injury, DO NOT touch 

the brush roll in the motorized nozzle when  the vacuum is on. Contacting the 
brush roll while it is rotating can cause other injuries. Always turn off before 
servicing. Use caution when operating near children.

Using Your Hand Vacuum

Easily clean messes on furniture, upholstery, stairs, and other hard-to-reach 
areas with one of the included accessory tools.
1. To detach the hand vacuum, press the wand release button and pull the wand  
    from the hand vacuum.

Wand Release Button

Содержание VSG2101






















Отзывы: