▫
Disconnect the power cord from the electrical outlet by unplugging it. DO
NOT disconnect by pulling on the cord.
▫
DO NOT immerse in water or spray directly with liquid.
▫
Check the Vacuum Chamber and Gasket, making sure they are clean and
free of debris. If needed, use a clean, damp cloth with mild soap.
a. Wipe the vacuum chamber clean.
b. Wipe the gasket clean.
c. Wipe the seal area clean.
▫
Do not store the VP230 outside. 65
°
to 75
°
recommended.
▫
DO NOT use any acetone-based or abrasive cleaners on the lid or other
plastic parts. Only clean lid with a damp cloth and mild soap.
Cleaning & Storage
Maintenance Kit
1. Double Sided Tape:
Used for adhering the
top bar that holds the seal pad in the lid.
2.
15-Amp Fuses (2x):
Can be used for
replacing fuses located on the control
transformer and the cord receptacle.
NSF models will have a fuse on the seal
transformer.
3. Seal Wire:
Used to replace seal wire that
spans the length of the seal bar; should
be replaced if the wire shows heavy
discoloration.
4. Seal Tape:
Used to replace seal tape the
covers the seal wires; should be replaced if
the tape shows heavy discoloration, is torn,
or is starting to lose the adhesive.
5.
Oil Fill Bottle:
Used to fill pump with oil.
6.
Hex/ Allen Wrench:
Used to removed
tension blocks that hold the seal wire to
the base of the seal bar.
7. #1 Screwdriver:
Used to un-thread screws
on the cabinet of the machine and the
screws to move the chamber.
1
2
3
4
5
7
6
12
VP
230
Chamber Vacuum Sealer |
User Guide
ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849
