7
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | www.VacMasterFresh.com | 800-821-7849
VP220 Chamber Vacuum Sealer |
User Guide
VP
220 Setup
How to Use
Please read all instructions before operating the VP220
1. Attach the power cord and plug the machine into a grounded
electrical outlet - Properly insert the electrical cord into the
power outlet on the back of the machine and then plug the
cord into the wall outlet.
2. Open the machine lid - Release the lid lock, located on the
right side of the machine, and allow the lid to lift and remain
open.
3. Turn the power switch on - Push the
black switch on the left side of the
machine, switching from the
"
0
"
to the
"
I
"
position. The LED Screen
on the control panel will illuminate
showing a symbol.
IMPORTANT:
Do not
turn the machine on until the lid lock has
been released. The lid lock feature is used ONLY to keep the lid
closed while the machine is in storage.
Adjusting the VP220 Timing Controls
NOTE:
Timing adjustments must be made with the lid lock off and the lid open.
To adjust/set the timing controls, press the SET button on the control panel
until the required label (Vacuum, Sealing or Cooling) is illuminated. For
each selection, the current time setting will show on the LED Screen. All
time settings are displayed in seconds.
For initial testing, the time settings should be:
Vacuum Time:
40 seconds
Sealing Time:
1.2 seconds
Cooling Time:
2 seconds
To change the timing control settings, please read
"Adjusting the VP220
Timing Controls"
on Page 8.
Содержание VP220
Страница 1: ......
