Vacmaster VP120, Руководство пользователя

Страница: 8 / 16

8
Operating Instructions ( Continued )
5. Fill the pouch and place inside the chamber
Fill the pouch with the product to be vacuum packaged, and place the pouch inside the
chamber. Keep pouches that contain liquids or wet product below the height of the seal bar.
Note: The entire pouch, including the opening, must remain inside of the chamber.
Using the pouch clip - To keep the pouch in place during
the vacuum cycle, you will want to use the pouch clip
accessory at the front of the chamber. Lift the pouch clip
lever up and insert the open end of the bag inside the
clip. Once the pouch is in position, press the pouch clip
place during the vacuum and seal process.
Note: Once the vacuum and seal cycle is complete, lift
the pouch clip lever up to remove the pouch.
6. Press the “START” button to vacuum and seal
Press the “Start” button to begin the vacuum process. The lid will close automatically and the
vacuum cycle will begin at the set vacuum time and count down to zero. Once the vacuum
cycle is complete, the seal process will begin. The seal cycle will begin at the set seal time
and count down to zero. Once the seal cycle is complete, air will be released back into the
chamber, the machine will give a long beep sound and the lid will rise automatically indicating
that the vacuum and seal cycle is complete.
Note: The “SEAL” button is an additional feature that allows you to abort the vacuum process
and seal the pouch. Press “SEAL” at any time during the vacuum cycle.
Pouch Clip Lever