Vacmaster VOM205P 1101, Руководство оператора, Страница: 11 / 15

11
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Disconnect the hose from the vacuum. (fig. 2)
3. Undo the latches and remove the power head from the collection tank. (fig. 3)
4. Clear all dirt or debris from the collection tank and hose. (fig. 4)
For filter changing and maintenance see instructions on page 12.
IMPORTANT! Clean or change the filter regularly for best performance. ALWAYS USE DUST
FILTER FOR DRY VACUUMING. If the machine is used without the dust filter, the motor will burn
out and the warranty will be voided. Always keep spare dust filters on hand.
NOTICE! The filter included is made of high quality material designed to stop small dust particles.
The filter should be used for dry pick-up only. A dry filter is necessary to pick up dust. If the
dust filter is wet, it will clog quickly and be very difficult to clean. Handle the filter carefully when
removing it for cleaning and replacing it. Check the filters for tears or small holes, a small hole
can let dust pass through and out of the filter. Do not use a filter with holes or tears; replace it
immediately.
MAINTENANCE
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.
3 2
4
3
1