Vacmaster VMVK1520SIWC, Руководство пользователя

Страница: 9 / 12

9 9
Cleaning Foam Sleeve Filter
1. With the removed power head in the upside down position, carefully remove foam
sleeve filter. (fig. 3)
2. Use a mild soap and water solution to wash foam sleeve filter and rinse with clean
water. (fig. 4)
3. Allow filter to air dry before installing and using again.
2 1 4 3 5
I
NStALLING & CLEANING HEPA FILtER
Installing HEpa FIlTEr
1. Verify that the power cord is disconnected from the outlet. (fig.1)
2. Unlock the filter door by lifting the lock tab UP to the unlocked position and pull
the door out. (fig. 2 & 3)
3. Remove the HEPA filter cartridge from the vacuum. (fig.4)
Cleaning HEpa Filter
4. Clean filter by brushing dirt off. For optimal performance a new filter is
recommended. (fig.5)
5. Install the cleaned or new filter into place. (fig. 6)
6. Insert the filter door tabs into the upper slots and lock the filter door into place.
(fig. 7 & 8)
7 8 6
2 1 4 3 5
t
ROUBLESHOOtING
Symptom possible Causes Corrective action
Vacuum will not
operate
1) No power supply. 1) Check power supply – cord,
breakers, fuses.
2) Faulty power cord. 2) Unplug and check the
power cord. If damaged,
have it repaired by a
professional.
3) Container full. 3) Empty container.
Dust comes out
from motor cover.
1) The PET cartridge
filter or collection bag
is missing or damaged. 1) Attach or replace PET
cartridge filter or collection
bag.
Reduced
efficiency and
motor/speed
vibration.
1) There is a blockage in
the nozzle or hose,
or the container inlet.
Or dust filter blocked
by fine dust. 1) Check nozzle, hose and
container inlets for
blockage. Take off the filter
and clean it. Or install new
cartridge filter.