background image

 

 
 

 

SAFETY INSTRUCTIONS & WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

 

Read and understand all instructions before using this vacuum  

Read and understand this owner’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. 
Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this 
Wet/Dry Vac only as described in this manual. To reduce the risk of personal injury or damage to your 
Wet/Dry Vac, use only Vacmaster™ recommended accessories. 
 

SAVE THIS MANUAL FOR FUTURE REFERENCE.

 

 

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: 

• 

Do not

 

run vac unattended. 

• 

Do not vacuum, or use this Wet/Dry Vac near flammable liquids, gases, or explosive vapors like gasoline 

or other fuels, lighter fluids, cleaners, oil-based paints, natural gas, hydrogen, or explosive dusts like coal 
dust, magnesium dust, grain dust, or gun power.  Sparks inside the motor can ignite flammable vapors or 
dust. 

• 

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 

• 

Keep cord away from heated surfaces. 

• 

Do not expose to rain. Store indoors. 

• 

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 

• 

Do not use with damaged cord, plug or other parts. 

• 

If your Wet/Dry Vac is not working as it should, has missing parts, has been dropped or damaged, left 

outdoors or dropped into water, return it to an independent service center. 

• 

Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or 

corners. 

• 

Do not run Wet/Dry Vac over cord. 

• 

Do not handle plug or the Wet/Dry Vac with wet hands. 

• 

To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials. 

• 

Do not use or store near hazardous materials. 

• 

Do not use this Wet/Dry Vac with a torn filter or without the filter installed except when vacuuming liquids 

as described in the operation section of this manual. 

• 

Do not

 

allow to be used as a toy. Close attention is necessary when used by or near children. 

• 

To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filter. 

• 

Do not leave Wet/Dry Vac unattended when plugged in.  Unplug from outlet when not in use and before  

  servicing.   

Turn off Wet/Dry Vac before unplugging. 

• 

Do not put any object into ventilation openings. Do not vacuum with any ventilation openings blocked; 

keep free of dust, lint, hair or anything that may reduce air flow. 

• 

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 

• 

To reduce the risk of falls, use extra care when cleaning on stairs. 

 

When using as blower: 

• 

Direct air discharge only at work area.

  

• 

Do not use Wet/Dry Vac as a sprayer. 

• 

Do not direct air at bystanders. 

• 

Keep children away when blowing. 

 
 
 
 

 
 

 
 

3

Содержание VJS1211













Отзывы: