Vacmaster VHB305M, Руководство оператора

Страница: 8 / 15

8
DRY VACUUM OPERATION
DRY VACUUMING
1. Verify that the power cord is disconnected from the outlet (fig.1).
2. In order to prepare your vacuum for dry vacuuming, make sure the filter is completely covering
the filter cage against the power head (fig.2 & 3) (Your Wet/Dry Vac comes with the reusable
cloth filter pre-installed, if not, see page 11 for installation instructions.).
3. Place the dust bag to the vacuum port inside the tank, and press to make sure the dust bag is
well assembled (fig.4).
4. Place the power head section back on the collection tank, and secure it in place using the
latches (fig.5).
OPERATING INSTRUCTIONS: DRY VACUUMING
5. Insert the larger end of the hose into the vacuum port on the tank. Push the required attachment
onto the free end of the hose or extension (fig.6).
WARNING
: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION
ENTITLED ‘IMPORTANT SAFETY INSTRUCTIONS’. DO NOT VACUUM IN AREAS
WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR.
FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER
FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL,
OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO:
COAL, MAGNESIUM, GRAIN, OR GUN POWDER. TO REDUCE THE RISK OF HEALTH
HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.
13. Align the two screw holes so that they are over a stud and secure the mounting support to the
wall stud, as shown, with the two screws provided (fig.14).
14. Place the wet and dry vacuum cleaner into the support (fig.15).
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has a double polarized plug (one with the
blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way. Double insulation eliminates the
need for the three wire grounded power cord and grounded power supply system.