background image

12

IMPORTANT! 

When vacuuming large quantities of liquids, do not immerse the nozzle completely 

in the liquid; leave a gap at the tip of the nozzle opening to allow air inflow. The machine is fitted 

with a float valve that stops the suction action when the collection tank reaches its maximum 

capacity. You will notice an increase in motor speed. When this happens, turn off the machine, 

disconnect from power supply, and drain the liquid. To continue vacuuming, replace the drain 

cap. After wet vacuuming, turn the machine off and remove plug from power supply. Empty the 

collection tank, clean and dry the inside and outside before storage. 

REMEMBER! 

The foam wet filter must be removed after wet vacuuming and the cartridge filter 

must be installed before dry vacuuming again.

BLOWER OPERATION

This Wet/Dry Vacuum has blowing capabilities. To use the blower feature follow the instructions 

listed.

1.  Verify that the power cord is disconnected from the outlet (Fig. 1).

2.  Make sure the collection tank is empty before using as a blower. Clear all dirt and debris from 

the hose and collection tank.

3.  Remove hose from the vacuum port.

4.  Insert the larger end of the hose into the blower port on the side of the power head and lock into 

place (Fig. 2).

5.  Choose the desired accessory and insert onto the end of the hose (Fig. 3).

6.  Verify that the on/off switch is in the ‘O’ OFF position before plugging the power cord into the 

outlet. Plug the power cord into the outlet (Fig. 4 & 5).

7.  Before turning on the vacuum, firmly hold the loose end of the hose. Turn the motor on by 

flipping the switch to the ‘I’ ON position (Fig. 6).

8.  Once you have completed blowing, flip the on/off switch to the 'O' OFF position and unplug the 

power cord from the outlet.

WARNING:

 ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 

(OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER.

WARNING: 

WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT 

BE INHALED. 

CAUTION:

 KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.  

6

4

2

1

5

3

Содержание VDK611PF 0201



















Отзывы: