www.VacMasterFresh.com • 800-821-7849
TROUBLESHOO
TING
Troubleshooting
1. The SV1 will not turn ON:
a. Make sure the machine is properly plugged into a
grounded outlet.
b. Make sure the outlet is working.
c. Check the power cord for tears and frays. Do not use the
machine if the power cord is damaged.
d. Make sure the power switch is turned ON. The LCD display
screen will illuminate when the machine is turned on.
2. The LCD display screen reads error code “E01”:
a.
Make sure the water level is between the MIN and MAX
shown on the SV1. The machine will alarm and power off
if the water level drops below the MIN required for
operation.
3. The machine is plugged in and turned on, but circulator will
not heat:
a. Turn OFF power.
b. Unplug electrical cord.
c. Open the plastic cover (using a flat head screwdriver or
similar item) on the front of the machine and press the
RESET button.
d. Plug unit into power supply.
e. Turn ON to test.
4. There is a loud noise from pump and minimal or no circulation:
a. Turn OFF power.
b. Unplug electrical cord.
c. Remove circulator from water to remove possible air bubble.
d. Clean pump filter.
9
WARNING
•
To avoid the possibility of personal injury, always unplug the circulator
from the electrical outlet before handling or cleaning.
•
To avoid the potential of injury or burns, allow the circulator to cool to
room temperature before removing from water tank.